#################################################################
#
#    Trellis Suite Release Notes
#    contact: support@rppl.com
#
#################################################################

[1.14.2] 2022/02/15
=================================================================
*** NOTE: REQUIRES Ripple Software Version 1.14.x ***
=================================================================
Feature:          Trellis - Added ability to select whether Trellis 
                            disables global stim flag on a pin when 
                            stopping a pattern.
Feature:          Trellis - Parallel port data is now included in EDF 
                            annotation data.
Feature:          Trellis - Default file save path by date will now 
                            update automatically. 
Feature:          Trellis - Added command line option to override the 
                            port used to open/write log files.
Feature:          Trellis - User can now check/uncheck the Start/Stop 
                            tone while a recording is in session.
Feature:          Trellis - Load Channel Map default folder now matches 
                            the default Save Map folder.
Feature:          Trellis - Added support for R04677 implant.
Feature:          Trellis - Added support for up to 10 cameras simultaneously.
Feature:          Trellis - Added support for R04678 Transceiver.
Bug Fix:          Trellis - *.ns3 files are no longer automatically
                            saved regardless of selection.
Bug Fix:          Trellis - Prevent Trellis from hanging and/or 
                            crashing when left (or right) clicking on 
                            NIP in Instrument Panel.
Bug Fix:          Trellis - Spike Scope now launches reliably.
Bug Fix:          Trellis - Trellis will now report if a needed network 
                            port required for the log file is able to 
                            open properly.
Bug Fix:          Trellis - Fixed error in min/max values when exporting 
                            EDF data from *.nfx files.
Bug Fix:          Trellis - Added Restore Default button to File Save UI.
Bug Fix:          Trellis - Set All Front Ends of same type option in 
                            Hardware Config screen will now only appear 
                            if a configurable property exists.

[1.14.1] 2021/08/09
=================================================================
*** NOTE: REQUIRES Ripple Software Version 1.14.x ***
=================================================================
Feature:          Trellis - R03745 transceiver is now supported
Feature:          Trellis - Task tray notifications added for 
                            recording/pausing/stopping
Feature:          Trellis - Added ability to enable/disable task tray 
                            notifications
Feature:          Trellis - Default maps files for Ripple Caps are 
                            now included in Trellis build
Feature:          Trellis - Log file now includes commands that start, 
                            pause, or stop saving data
Feature:          Trellis - User can now modify all ADC settings for 
                            Front Ends of same type
Feature:          Trellis - EDF output is now exported from *.nxx/*.nev 
                            file(s) as a post process to maintain 
                            data precision
Feature:          Trellis - Camera recording now defaults to enabled 
                            when a camera is connected
Feature:          Trellis – Added ‘Ripple_Sample_Data_Set_v2’ to 
                            ../Users/../Trellis/sampleData folder
Bug Fix:          Trellis - Fixed EDF output error with mapped pins
Bug Fix:          Trellis - Min/Max values for *.nfx files are now 
                            correct
Bug Fix:          Trellis - EDF pin labels more adequately represent 
                            Front End pin IDs
Bug Fix:          Trellis - Files selected in EDF export is now respected.
Bug Fix:          Trellis - Non ascii characters can now be used for 
                            saving data
Bug Fix:          Trellis - Setting filters avoids sending unnecessary 
                            messages to the NIP
Bug Fix:          Trellis - Implant status stream conversion factors 
                            are now correct
Bug Fix:       Neuroshare – Updated Matlab Neuroshare toolbox to be more 
                            compatible with *.nfx streams

[1.14.0] 2021/06/30
=================================================================
*** NOTE: REQUIRES Ripple Software Version 1.14.x ***
=================================================================
Feature:          Trellis - All Front End pins in File Save screen 
                            will be selected by default when a stream 
                            is enabled
Feature:          Raster  - Time divisions in Raster menu are selectable
Feature:          Trellis - Analog and Digital input pins can be mapped
Feature:          Raster  - Ability to create and modify map file 
Feature:          Trellis - Ability to create and modify map file 
Feature:          Trellis - Ubuntu 20.04 OS is now supported
Feature:          Trellis - Xippmin removed from build
Bug Fix:          Trellis - When selecting 'Days' in the 'Stop After' on 
                            File Save screen, the value will no longer 
                            revert to 0
Bug Fix:          Trellis - The min/max uV values for *.nfx files 
                            is now respected
Bug Fix:          Trellis - The Units for min/max voltage for EDF+
                            files will auto adjust to ensure the value
                            remains confined to a 16 bit value
Bug Fix:          Trellis - Ensure last event is not lost when merging 
                            annotation data into EDF+ file
Bug Fix:          Trellis - Filter selection menu reliably sets filters
Bug Fix:          Trellis - Fixed issue with remote File save (from versions 1.13.2 and 1.13.3) 
Bug Fix:        Impedance - All channels can be viewed when channels are mapped
Bug Fix:        Impedance - Prevent crash if a map file is missing positional information

[1.13.3] 2021/01/24
=================================================================
*** NOTE: REQUIRES Ripple Software Version 1.13.x ***
=================================================================
Feature:          Trellis - support for Explorer Summit processor
Feature:          Trellis - support for EEG+tES front end
Feature:          Trellis - support for Explorer AIO/DIO/PhysioD

[1.13.2] 2020/12/16
=================================================================
*** NOTE: REQUIRES Ripple Software Version 1.13.x ***
=================================================================
Feature:          Trellis - Continuous Impedance Measurement
Feature:          Trellis - Enable Visualization of Impedance in 2D map
Feature:          Trellis - Save to EDF+
Feature:          Trellis - New Filter Selection UI 
Feature:          Trellis - Set Default Instrument Configuration on Load
Feature:          Trellis - Gen 3 Processor Support
Feature:           Raster - Sort Channel List Multiple Ways
Feature:           Raster - Allow stream type label to be hidden
Bug Fix:          Trellis - File save via digital trigger now correctly starts selected cameras


[1.13.1] 2020/08/18
=================================================================
*** NOTE: REQUIRES Ripple Software Version 1.13.x ***
=================================================================
Feature:          Trellis - Add Support for Macro and Macro+Stim Front Ends
Feature:          Trellis - Add Selection/De-selection of multiple signals in Raster
Feature:          Trellis - Add Load/Save of Raster Views and custom Default
Bug Fix:          Trellis - Allow support of config files with 18 Front Ends


[1.13.0] 2020/03/13
=================================================================
*** NOTE: REQUIRES Ripple Software Version 1.13.x ***
=================================================================
Feature:          Trellis - Added support for Explorer QuestHD processor
Feature:          Trellis - Added support for Explorer EEG and ECoG+Stim Front Ends
Feature:          Trellis - Updated processor icons


[1.12.0] 2019/05/14
=================================================================
*** NOTE: REQUIRES Grapevine Software Version 1.12.x ***
=================================================================
Feature: Video Controller - Added Video Controller application with webcam support 
Feature:          Trellis - Added support for Pico Front Ends
Bug Fix:          Trellis - Fixed issue where EMG v2, ADIO, and LINK32 configuration settings were not saving properly
Bug Fix:        Python NS - Fixed bug with timestamp when using 'get_time'


[1.11.1] 2018/10/02
=================================================================
*** NOTE: REQUIRES Grapevine Software Version 1.11.x ***
=================================================================
Bug Fix:          Trellis - Fixed issue where config packets could get lapped at high channel counts


[1.11.0] 2018/07/02
=================================================================
*** NOTE: REQUIRES Grapevine Software Version 1.11.x ***
=================================================================
Feature:          Trellis - Modifications to LINK32 info display panel to support new Link32 firmware
Feature:        Impedance - Added support for LINK32
Bug Fix:           Raster - Fixed issue with signals being displayed out of order across channels
Bug Fix:          Trellis - Fixed issue where screens not showing on main display when monitor unplugged
Bug Fix:          Trellis - Fixed issue with SurfS2 features not fully enabled
Feature:          xippmex - Added support for Impedance and On/Off control for LINK32


[1.10.0] 2018/03/26
=================================================================
*** NOTE: REQUIRES Grapevine Software Version 1.10.x ***
=================================================================
Bug Fix:      Stimulation - Fixed issue with micro+stim R-Number check in stim controller
Bug Fix:      Stimulation - Fixed issue with loading saved stimulation configuration files
Feature:      Stimulation - Changed max stimulation limit (100 times step size)
Feature:          Trellis - Added support for new stim lookup method
Feature:          Trellis - Added support for port trip error reporting in title bar
Feature         File Save - Added message dialog and warning tone if hardware error is detected during an active recording
Feature:          xippmex - Added support for new stim lookup method
Feature:          xippmex - Added support for xipp error messages
Feature:          xippmex - Changed Stimulation output limits for stim front ends (100 times step size)
Feature:          xippmex - Added Support for changing spike threshold values
Bug fix:          xippmex - Fixed issue with potential missrepresenation of Analog inputs
Bug fix:          xippmex - Fixed issue with missing data having the wrong filler values


[1.9.0] 2017/10/18
=================================================================
*** NOTE: REQUIRES Grapevine Software Version 1.9.x ***
=================================================================
Bug Fix:          Trellis - Fixed issue where UDP packets with multiple Xipp packets were being split up by packet forwarder
Bug Fix:          Trellis - Fixed issue where network was not initializing correctly when network interface adapter changed after Trellis closed
Bug Fix:          Trellis - Fixed timer access issue that was causing spurious crashes
Bug Fix:          Trellis - Fided handling of multi-xipp UDP internal routing in when Trellis-processor communication is TCP
Feature:          Trellis - Added code to reinitialize network if interface change is detected while Trellis is running.
Feature:          Trellis - Added support for Link32 front end
Feature:          Trellis - Added support for Nomad processor
Feature:          Trellis - Added support for ADIO front end


[1.8.3] - 2017/05/04
=================================================================
*** NOTE: REQUIRES Grapevine Software Version 1.8.x ***
=================================================================


[1.8.2] - 2017/04/28
=================================================================
*** NOTE: REQUIRES Grapevine Software Version 1.8.x ***
=================================================================
Bug Fix:          Xippmex - Incorrect scaling for continous data for raw and lfp
Feature:          Xippmex - Changed format for returned spikes to 2D array, from cell arrays with 1D arrays.


[1.8.1] - 2017/04/28
=================================================================
*** NOTE: REQUIRES Grapevine Software Version 1.8.x ***
=================================================================


[1.8.0] - 2016/12/09
=================================================================
*** NOTE: REQUIRES Grapevine Software Version 1.7.x ***
=================================================================
Feature:          Trellis - TCP network connection to Grapevine and xippmex
Feature:          Trellis - Wireless connection to Nomad Grapevine
Feature:          Xippmex - TCP network connection to Grapevine and Trellis
Feature:          Xippmex - all functions block untill the change is confirmed (or timeout is reached)


[1.7.4] - 2016/09/15
=================================================================
*** NOTE: REQUIRES Grapevine Software Version 1.7.x ***
=================================================================
Feature:          Trellis - Support for v2 EMG front end with 7.5 kHz sample rate


[1.7.3] - 2016/04/29
=================================================================
*** NOTE: REQUIRES Grapevine Software Version 1.7.x ***
=================================================================
Bug Fix:          Trellis - Fixed how Trellis handles remote control recording requests with invalid start time


[1.7.2] - 2016/04/08
=================================================================
*** NOTE: REQUIRES Grapevine Software Version 1.7.x ***
=================================================================
Feature:          Trellis - Support for micro2+stim front ends
Bug Fix:          Trellis - Fixed error with unintuitive digital routing signal drop down behavior


[1.7.1] - 2016/03/24
=================================================================
*** NOTE: REQUIRES Grapevine Software Version 1.7.x ***
=================================================================
Feature:          Trellis - All File Save errors are reported with the same dialog box (not one per error)
Bug Fix:          Trellis - Loading configs caused spike filter settings to change unexpectedly
Bug Fix:          Trellis - (Mac) Shared memory not deleted correctly causing problems on Trellis launch
Bug Fix:      Stimluation - nano2+stim HC front ends (R02014) were not enabled in hardware browser


[1.7.0] - 2016/03/14
=================================================================
*** NOTE: REQUIRES Grapevine Software Version 1.7.x ***
=================================================================
Feature:          Trellis - Added warning when front end error is reported by NIP (i.e. when port light turns red)
Feature:          Trellis - Support for micro2 front end
Feature:          Trellis - Support for global channel labeling (i.e. to reflect electrode map)
Feature:          Trellis - Support for syncrhonization of data and recording with 2 NIPs
Feature:          Trellis - Support for loading nano2+stim stim lookup table data
Feature:          Trellis - Support for echoing stimulation output to digital output
Feature:           Raster - Support for showing Digital Output events (when UDP loopback is enabled)
Feature:      Stimulation - Stimulation interface is disabled (and all stimulation terminated) if astimulation front end reports a hardware error
Bug Fix:        File Save - The last 2 Digital Input events were being truncated from NEV file
Bug Fix:        File Save - Playing a tone on recording start and stop was not working
Bug Fix:           Raster - Spike event display erroneously showed colored ticks, and ticks of varying heights
Bug Fix:           Raster - Does not show both 30K and 1K continuous Analog I/O signals at same time
Bug Fix:          xippmin - Example program to control Trellis recording fails to stop recording


[1.6.0] - 2015/10/27
=================================================================
*** NOTE: REQUIRES Grapevine Software Version 1.6.x ***
=================================================================
Feature:          Trellis - Support for nano2 front end
Feature:          Trellis - Support for nano2 HV front end
Feature:          Trellis - Support for nano2+stim front end
Feature:          Trellis - Support for configuring nano2 hardware filter low-corner (0.1 Hz - 100 Hz)
Feature:          Trellis - Support for configuring nano2 and nano2+stim ADC resolution (0.125 uV/bit, 0.25 uV/bit, 0.5 uV/bit)
Feature:          Trellis - New "Front End Settings" section in Instrument Network tree
Feature:          Trellis - Enhanced logging (logs saved in ~\Trellis\logFiles directory)
Feature:          Trellis - Changed gain for EMG front end signals routed through analog i/o.
Bug Fix:          Trellis - Digital input triggers File Save even when triggering is not enabled  
Feature:          xippmin - Compiles on Windows (with MinGW GCC)
Feature:          xippmex - Can now be run on same machine as Trellis
Feature:          xippmex - Support for changing nano2 and nano2+stim ADC resolution
Feature:          xippmex - Support for changing nano2 hardware filter low-corner
Bug Fix:          xippmex - Occassionally the 'trial' command crashed MATLAB
Bug Fix:       neuroshare - large data sets had overflow of a pointer in nsGetXXData
Bug Fix:           mksort - Added support for MATLAB 2015a and 2015b


[1.5.0] - 2015/03/13
=================================================================
*** NOTE: REQUIRES Grapevine Software Version 1.5.x ***
=================================================================
Feature:        File Save - Support for auto file segmentation (by size or time) during a recording
Feature:        File Save - Low disk warning and recording auto-stop (when free space < 100MB)
Feature:        Impedance - Support for impedance measurement with nano front ends (version 2.2 or greater)
Feature:      Spike Scope - Event waveforms are drawn in a continuous fifo manner (i.e. not cleared when persistence level is reached)
Feature:       Spike Grid - Event waveforms are drawn in a continuous fifo manner (i.e. not cleared when persistence level is reached)
Feature:       Spike Grid - An expansion icon is shown on the toolbar whenever toolbar elements are hidden
Feature:          Trellis - Support for new 24-bit EMG front end in Trellis and all applications
Bug Fix:           Raster - Second Micro HV does not show up in hardware browser
Feature:          xippmex - Control of fast-settle added
Feature:          xippmex - Control of digital i/o 'capture on digital bit change' added
Feature:          xippmex - Can modify stim sequence 'action' propery in 'stimseq' command
Bug Fix:          xippmex - 'time' command could return less than zero with long running NIP
Bug Fix:          xippmex - digital parallel inputs were returned as signed integer
Bug Fix:          xippmex - rare failures when bad streams were requested with 'signal' command


[1.4.3] - 2014/08/28
=================================================================
*** NOTE: REQUIRES Grapevine Software Version 1.4.x ***
=================================================================
Bug Fix:           Raster - Upper 4 channels of analog parallel inputs not showing up correctly  
Bug Fix:           Raster - Shift+Click channel selection not working for more than 16 channels
Bug Fix:          Trellis - Added default signal for analog output routing 
Bug Fix:          Trellis - Digital parallel port file save triggering not restoring from config file correctly
Feature:       Spike Grid - Adjusted the window width at which toolbar controls are hidden/shown


[1.4.2] - 2014/08/08
=================================================================
*** NOTE: REQUIRES Grapevine Software Version 1.4.x ***
=================================================================
Bug Fix:          Trellis - Fixing digital triggering (which broke in the previous release)


[1.4.1] - 2014/08/03
=================================================================
*** NOTE: REQUIRES Grapevine Software Version 1.4.x ***
=================================================================
Feature:        SpikeGrid - Heat Map
Feature:      Stimulation - Stim score play launches a separate window with a button that is a safety switch for stopping stimulation at any time.
Feature:          Trellis - Major performance improvements
Feature:     Trellis Apps - Major performance improvements
Feature:        File Save - Added NIP time at file start to NEV, NSx, and NFx file header
Feature:       neuroshare - Added function to retrieve NIP time at file start
Bug Fix:      Stimulation - App crashes when loading a second stimulation configuration file
Bug Fix:      Stimulation - Some frequencies (such as 30 Hz) cause errors when playing score stimulation
Bug Fix:          xippmex - Major memory leak 
Bug Fix:          xippmex - 'signal' command returns empty strings
Bug Fix:          xippmex - Can't close xippmex after error
Bug Fix:          xippmex - global stim disable occurs at wrong time
Bug Fix:          xippmex - signal can cause seg fault
Bug Fix:          xippmex - cannot enable/disable 'stim' data stream on per-channel basis
Bug Fix:          xippmex - filter 'custom' elec off by one
Bug Fix:          xippmex - surf D v1.3 hi-res stream producing all 0s when using 'cont' function
Bug Fix:          xippmex - 'stim' command doesn't handle spaces in string
Bug Fix:          xippmex - fails to initialize for NIP with no headstages


[1.4.0] - 2014/04/08
=================================================================
*** NOTE: REQUIRES Grapevine Software Version 1.4.x ***
=================================================================
Feature:          Trellis - Interface to link front end fast settle behavior to digital inputs, stimulation, signal saturation, and user input
Feature:          Trellis - Configuration save/load now supports restoring tracking settings in Analog/Digital output tracking interface
Feature:          Trellis - New interface to select signal filters in instrument details panel 
Feature:          Trellis - Support for color schemes (light-on-dark and dark-on-light)
Feature:          xippmex - Support for MATLAB-based interaction with Grapevine and Trellis
Feature:        File Save - Support for new "hi-res" float-32 streams
Bug Fix:        File Save - Some form fields were overwriting user input
Bug Fix:      Stimulation - NIP clock and Trellis CPU clock were not synchronized
Bug Fix:      Stimulation - Stimulation trains stopped unexpectedly after 4095 (0xFFF) pulses


[1.3.0] - 2013/07/01 (BETA)
=================================================================
*** NOTE: REQUIRES Grapevine Software Version 1.3 ***
=================================================================
New App:      Stimulation - Provides an interface for controlling stimulation on Ripple's micro+stim front ends 
New App:        Impedance - Supports measuring and recording of impedance on micro and surfS front ends
Feature:             Apps - State persistence (i.e. When opened Apps restore themselves to the last used settings)
Feature:      Spike Scope - New electrode map file format.
Feature:      Spike Scope - Ability to set display scale at a per view level
Feature:          Trellis - Input-to-output Network latency test (requires wrap-around SMA cable)
Feature:          Trellis - NIP status monitoring. User is notified if Trellis restarts with new/different hardware configuration 
Feature:        File Save - NIP status monitoring. User is notified if interruption in network connection is detected
Feature:        File Save - NIP status monitoring. Recording is stopped if NIP restart is detected
Bug Fix:           Raster - Changed spike rendering code to ensure proper alignment with respect to continuous channels 
New Doc:          Trellis - Trellis user manual ([trellis_install_dir]/Trellis/Documentation/Grapevine/GrapevineNIP.pdf)
New Tool:        Wisteria - Matlab-based application for viewing files recorded in the NEV/NSx2.2 file format ([trellis_install_dir]/Trellis/Tools/wisteria)
New Tool:          MKsort - Open source Matlab-based spike sorter. Supports NEV and NS5 data file format ([trellis_install_dir]/Trellis/Tools/mksort)


[1.2.1] - 2013/02/22
=================================================================
Bug Fix:         FileSave - Fixed bug that occasionally caused recordings to become very large


[1.2.0] - 2013/01/09
=================================================================
*** NOTE: REQUIRES Grapevine Software Version 1.2 ***
=================================================================
Feature:         Trellis  - Support for new Scout NIP
Feature:         FileSave - Added support for saving stimulation waveforms
Feature:         Trellis  - Checkbox for toggling whether nip captures digital input on parallel port bit change
Bug Fix:         FileSave - (Mac/Linux) month and day in "Time Origin" field in NEV Neuralev header now 1-indexed


[1.1.1] - 2012/10/11
=================================================================
Bug Fix:        File Save - Fixed *CRITICAL* error which had potential to cause data loss


[1.1.0] - 2012/09/28
=================================================================
*** NOTE: REQUIRES Grapevine Software Version 1.1 ***
=================================================================
Feature:       NIP Config - Ability to configure fast settle/recovery of recording after stimulation
Feature:       NIP Config - Minor UI changes
Feature:        File Save - Ability to save individual channels from micro/nano/surf front ends
Feature:        Simulator - Supports NIP Grapevine software version 1.1
Feature:        Simulator - Ability to save simulation configurations
Bug Fix:       NIP Config - Spike event triggered digital output not working
Bug Fix:       NIP Config - Audio output tracking did not update when Trellis not displaying the "Instruments" tab
Bug Fix:        File Save - Signal selection reverted to default when Digital or Analog signal routing UI changed
Bug Fix:        File Save - Incorrect large timestamps at beginning of NEV files
Bug Fix:        Matlab NS – ns_GetEventData returned wrong data
Bug Fix:        Python NS – Import of large NEV files failed
Bug Fix:        Python NS – Internal NEV cache data unnecessarily large


[1.0.0] - 2012/08/10
=================================================================
*** NOTE: REQUIRES Grapevine Software Version 1.0 ***
=================================================================
Feature:        File Save - Trigger file save start/stop pause/unpause with digital input
Feature:        File Save - Specify individual front ends(s) to save data for
Feature:        File Save - Specify subset of analog input channels to save data for
Feature:        File Save - Save NIP configuration with data files
Feature:        File Save - Display of currently recording files
Feature:        File Save - Display of previously recorded files
Feature:       NIP Config - Ability to save/load Instrument configurations
Feature:       NIP Config - Global auto thresholding (micro electrode front ends)
Feature:       NIP Config - UDP-control of digital output
Feature:       NIP Config - Digital output loopback
Feature:       NIP Config - Turn on/off individual front end inputs
Feature:       Trellis UI - Minor changes to layout and look of various components.
Feature:      Spike Scope - Dual thresholding
Feature:      Spike Scope - Spike sorting
Feature:           Raster - User specified arrangement of signals
Feature:           Raster - Signal coloring
Feature:            Tools - pyns (Python-native implementation of neuroshare API for Nev/NSx files) see Trellis/Documentation/python/pyns/pyns.pdf
Feature:            Tools - matlab-native implementation of neuroshare API for Nev/NSx files see Trellis/Tools/matlab/neuroshare
Feature:            Tools - matlab example scripts see Trellis/Tools/matlab/scripts
Feature:          General - Official Trellis install package for Linux


[0.9.9] - 2012/02/17
=================================================================
Feature:        File Save - Supports recording SurfD front end data
Feature:          Trellis - Info and error logging (<trellis_install_dir>\Apps\Trellis\bin\trellis.log)
Feature:       Trellis UI - Minor layout changes


[0.9.8] - 2012/01/20
=================================================================
Feature:        File Save - Remote control over instrument network
Feature:        File Save - Option to play tone when recording starts and stops (for video synchronization)
Feature:       Trellis UI - Several UI changes to improve usability
Feature:    Trellis Tools - XippMin project for external Trellis integration support (see: <install_dir>/Tools/XippMin)
Feature:            Build - Release notes added to install package


[0.9.7] - 2011/12/23
=================================================================
Feature:        File Save - Analog signals can be saved at 1k (i.e. downsampled from 30k).
Feature:        File Save - Trellis version information inserted into NEURALEV header (*.NEV) file and prepended to comment field in NEURALCD header (*.NSx)
        
Bug Fix:      Spike Scope - Threshold edit field not refreshing when focus is lost
Bug Fix:       Spike Grid - Arrow key navigation causes crash.
Bug Fix:        File Save - Erroneous timestamps on first few spikes.


[0.9.6] - 2011/12/05
=================================================================
Internal Release


[0.9.5] - 2011/11/10
=================================================================
Internal Release


[0.9.4] - 2011/10/28
=================================================================
Feature:        File Save - NEV/NSx 2.2 added support for saving raw microelectrode signals
Feature:        File Save - NEV/NSx 2.2 added support for saving digital packets
           
Bug Fix:        File Save - NEV/NSx 2.2 header information corrected


[0.9.3]
=================================================================
Bug Fix:        File Save - synchronization of spike and continuous data


[0.9.2]
=================================================================
Feature:     Trellis - Digital output routing

Bug Fix:        File Save - scale factors and filter settings now correctly saved in NEV/NSx files
Bug Fix:       Spike Grid - improved app load speed
Bug Fix:      Spike Scope - preview pane now redraws itself instead of clearing history on window resize